TP 206+ all-tube phono preamplifier
The CANOR TP 206+ is a fully valved phono stereo MM preamplifier. We use high-quality teflon insulated metal RCA connectors for input and output. For a relatively small dimensioned device we have chosen external feeding from a power transformer to maintain the best values of the signal-to-noise ratio. To stabilize anode voltage we use a special stabilizer with superior circuits of current supply to create a totally clean feeding without noise.
The TP 206+ phono stage tubes are being burned-in and measured on our specially developed BT-2 and TTM-2 measuring devices.
The TP 206+ phono stage tubes are being burned-in and measured on our specially developed BT-2 and TTM-2 measuring devices.
TP 206+ all-tube phono preamplifier
The CANOR TP 206+ is an improved version of the standard model, moreover, it contains step-up transformer circuits which allow to connect also MC pickups. As became quite common to the "+" versions, we again use the superior Mundorf capacitors.
The TP 206+ phono stage tubes are being burned-in and measured on our specially developed BT-2 and TTM-2 measuring devices.
The TP 206+ phono stage tubes are being burned-in and measured on our specially developed BT-2 and TTM-2 measuring devices.
Photogallery
(click to enlarge)
">
| Tubes | 3 x 12AX7 |
| Input impedance MM | 47 kOhm |
| Input capacitance MM | 100pF/220pF |
| Gain MM | 42 dB / 47 kOhms |
| SNR MM | 70 dB / 72 dB TP206+ |
| Input impedances MC only TP206+ |
10 Ohm / 20 Ohm / 50 Ohm 100 Ohm / 200 Ohm / 500 Ohm |
| Gain MC only TP206+ | 62 dB |
| SNR MC only TP206+ | 70 dB |
| THD | < 0.3% (1kHz) |
| RIAA-equalisation | |
| curve accuracy | 20 Hz - 20 kHz / ±0.3 dB |
| Power | 16 V / 1000mA |
| Dimensions (w x h x d) | 210 x 88 x 295 mm |
| Weight without power supply | 3 kg |