Canor Hyperion P1

Vacuum Tube Preamplifier

Reference Line

Hyperion P1 is a brand new vacuum tube preamplifier of pure A-class with zero feedback, designed and produced by CANOR. It is considered a reference preamplifier of the CANOR brand.

Explore our product lines and product naming conventions here.

Canor Hyperion P1 - Vacuum tube preamplifier of class-A

Highlights

01
                            The solid aluminium chassis provides excellent overall durability and reduces vibrations
                        

02
                            Zero global feedback - results in a sound that is more musical and realistic in numerous aspects
                        

03
                            Perfect filtration solution thanks to the specially designed power transformer
                        

Main Features

Accurate Balanced Attenuator

The 64-steps balanced attenuator provides gain control in 1 dB increments, with a minimum attenuation of 63 dB and it is located in a special aluminium box (10mm thick walls) which provides perfect shielding.

The anti-vibrations

The attenuator, as well as the electronic part, are installed on anti-vibration pads (columns) which contributes to the overall elimination of vibrations.

Zero Global Feedback

The Hyperion P1 is a Class-A preamplifier and was designed to avoid ANY global feedback

Interference elimination

The analogue part is separated from the power part by a solid aluminium wall (10 mm thick) which contributes to the elimination of interference

The attenuator control

The attenuator controls are galvanically separated via optical drivers.

CMT ™ technology

The Hyperion P1 utilizes our advanced CMT ™ technology (CANOR ® PCB Milling Technology) for optimal performance. The CMT™ technology allows us to get the dielectric loss factors (loss tangent) of PCB close to the loss factor of air. Thanks to this technology we managed to get repeatedly to the parameter level of the so-called “wire-to-wire connections“.

Gallery

Product Features

The attenuator is located in a special aluminium box (10 mm thick walls) which provides perfect shielding and thanks to the special design, it also absorbs the vibrations.
The Hyperion P1 is a Class-A preamplifier and was designed to avoid ANY global feedback.
The attenuator, as well as the electronic part, is installed on anti-vibration pads (columns), which contribute to the overall elimination of vibrations.
The analog part is separated from the power part by a solid aluminum wall (10 mm thick), which contributes to the elimination of interference.
The attenuator control is galvanically separated via optical drivers.

Preamplifier class	A
Gain (XLR OUT)	11 dB
Output impedance	< 150 Ω
Frequency response	10 - 80 000 Hz ± 0,1 dB
Input impedance	30 kΩ
Inputs	4 x XLR, 5 x RCA (One pair selectable as FIX.OUT)
Outputs	2 x XLR, 1 x RCA
Total Harmonic Distortion	< 0,005% (1 kHz, 2 V RMS) XLR < 0,3 % (1 kHz, 49 V RMS) XLR
Channel separation	> 110 dB
Signal-to-noise ratio	> 115 dB (20 Hz - 80 kHz)
Tube complement	4x 6922, 2x 6H30PI
Power	230 V / 50-60 Hz / 180 VA
Dimensions (w x h x d)	450 x 190 x 465 mm
Weight (net)	29 kg